Nitrogen Adsorbent
HTN102 Nitrogen-Removal adsorbent
|
Application
HTN102 has been applied in base oil of lubrication to remove nitrogen after HTN101 agent.
Characteristics
Low applied temperature: right adsorption temperature is 80-90°C, which is 100℃ lower than activated clay, so heater is not necessary, which can save energy consumption.
Low additive: additive is 0.1-0.3%, which is 20% of that of activated clay, so reduce base oil consumption.
Simple operation: can use former activated clay equipments.
Physical and chemical properties
|
Appearance
|
Off-white power
|
|
Bulk Density, kg/l
|
0.6-0.9
|
|
Adsorption ratio, %
|
≥80
|
Operating Conditions
HTN102 is added base oil of lubrication treated by HTN101 agent after be measured, to mix for 30 minutes in 80-90°C, then separate adsorbent residue through filtering machine.
|
|
| [Back] |
HTN102 Nitrogen-Removal adsorbent
|
Application
HTN102 has been applied in base oil of lubrication to remove nitrogen after HTN101 agent.
Characteristics
Low applied temperature: right adsorption temperature is 80-90°C, which is 100℃ lower than activated clay, so heater is not necessary, which can save energy consumption.
Low additive: additive is 0.1-0.3%, which is 20% of that of activated clay, so reduce base oil consumption.
Simple operation: can use former activated clay equipments.
Physical and chemical properties
|
Appearance
|
Off-white power
|
|
Bulk Density, kg/l
|
0.6-0.9
|
|
Adsorption ratio, %
|
≥80
|
Operating Conditions
HTN102 is added base oil of lubrication treated by HTN101 agent after be measured, to mix for 30 minutes in 80-90°C, then separate adsorbent residue through filtering machine.
|
|
| [Back] |
